Need help with Avantguard 5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41633
Printed Date: May 10, 2025 at 10:59 PM

Topic: Need help with Avantguard 5

Posted By: naamanf
Subject: Need help with Avantguard 5
Date Posted: October 25, 2004 at 5:42 PM

I am installing a AG 5 into a 2004 Yukon. I am using a Crimestopper GM-U7 for Passlock and doorlocks through the data-bus. Question is the AG 5 has a "remote start smart lock" ground output and a factory alarm disarm out put. I need a ground when running to the GM-U7 does one of these fit the bill? It doesn't say in the manual if they are momentary or lached during remote start.

Replies:

Posted By: naamanf
Date Posted: October 25, 2004 at 6:05 PM

As I understand it the GM-U7 will disarm the factory alarm and unlock the doors. During remote start. How can I relock the doors after the remote start? The GM-U7 inputs are lock/arm and unlock/disarm.

Also the remote start has a third ignition trigger. Would this be a ground or 12v. I want to use it as my ground when running or use it to power a relay.

Posted By: naamanf
Date Posted: October 25, 2004 at 8:19 PM

Okay I think I answered all my own questions.

Print Page | Close Window