Directed 506T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41689
Printed Date: May 02, 2025 at 4:20 PM

Topic: Directed 506T

Posted By: audiocableguy
Subject: Directed 506T
Date Posted: October 26, 2004 at 2:31 PM

Lost the all important paperwork for a 506T. The black wire I figured out, next are a purple and orange?? One must be power? . How do you set this thing?

Replies:

Posted By: Teken
Date Posted: October 26, 2004 at 3:25 PM

Purple & Orange wire???

-------------
Knowledge is power. But only if you apply that knowledge in a positive way, which promotes positive results in others.

EVIL Teken . . .

Posted By: auex
Date Posted: October 26, 2004 at 4:36 PM

Here is the install manual, there is no purple or orange wire though.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: audiocableguy
Date Posted: October 26, 2004 at 4:56 PM

Now I know why NASA never called back. The unit is an older one, before the 3 pin disconnect. I had gone in and soldered 3 new leads on to color match my last alarm! Thanks for the info!

Posted By: Teken
Date Posted: October 26, 2004 at 9:51 PM

That's why I asked. I went to the junk pile where they keep all the used sensors, and none of the wiring mathced what you said.

Went to the computer to look up the PDF, and it too was not color coded as you stated.

Had me going there for second. posted_image

-------------
Knowledge is power. But only if you apply that knowledge in a positive way, which promotes positive results in others.

EVIL Teken . . .

Print Page | Close Window