2005 Ford F-350 Diesel & 2002 Dodge 3500
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41707
Printed Date: May 01, 2025 at 8:12 PM
Topic: 2005 Ford F-350 Diesel & 2002 Dodge 3500
Posted By: Mr_Fusion
Subject: 2005 Ford F-350 Diesel & 2002 Dodge 3500
Date Posted: October 26, 2004 at 6:10 PM
Hello, I am looking for a wiring diagram for a 2005 Ford F-350 Diesel and a 2002 Dodge 3500 Ram Diesel. Thank you for your help! Both will receive alarm/remote start combos and have factory keyless remotes.
Replies:
Posted By: extreme1
Date Posted: October 26, 2004 at 9:27 PM
FYI, 2005 Ford Superduty trucks now come equiped with Transponder keys and so far I have not been able to locate a tach source for them.
We used a module that pulls a tach signal off the databus.
2002 Ram 3500 is same wiring as a 2001, 2000, 1999, 1998 etc.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: misterjimbo
Date Posted: October 27, 2004 at 2:51 PM
Up to 2004 the tach used to be a green with white taped to a harness near the drivers kick, did they change that?
-------------
Posted By: extreme1
Date Posted: October 27, 2004 at 4:19 PM
They indeed changed that.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: Mr_Fusion
Date Posted: October 27, 2004 at 9:48 PM
Which databus module is available for this vehicle?
Posted By: Mr_Fusion
Date Posted: October 27, 2004 at 9:48 PM
Which databus module is available for this vehicle? Also, what can I use for the wait to start on the Ford?
Posted By: extreme1
Date Posted: October 27, 2004 at 10:30 PM
there is no available wait to start
Click here------------- Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: Mr_Fusion
Date Posted: October 27, 2004 at 10:45 PM
What I am REALLY looking for is the color wire at the glow plug relay that feeds the glow plugs (or activates the relay) and the wire color for the crank position sensor that can be used as a tach signal. Does anyone have any information on this?
|