04 Escalade Remote Start Problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41760
Printed Date: May 02, 2024 at 8:59 PM
Topic: 04 Escalade Remote Start Problem
Posted By: Bryce1131
Subject: 04 Escalade Remote Start Problem
Date Posted: October 27, 2004 at 4:33 PM
I just installed a DEI Remote Start on a customers 04 Escalade and have a slight problem. When you remote start the truck it just creeps along and has no speed a all. The dealership looked at it for me and told me that the remote start is not "waking up" the transmission. Has anyone ever heard of this before and if so, how do you rectify it. I am somewhat confused. I have been installing these for a long time now and never encountered this before. Thanks.
Replies:
Posted By: Scott35
Date Posted: October 27, 2004 at 4:37 PM
white wire, 2nd ignition.
-------------
Tacomacrew
Posted By: Bryce1131
Date Posted: October 27, 2004 at 5:05 PM
My tech told me that he tested the 2nd ignition wire and got 12 volts during start up. We are going to rewire the tap in point and hope that is it. Thanks
Posted By: Velocity Motors
Date Posted: October 27, 2004 at 7:53 PM
how did you wire in the 2nd IGN wire ? Make sure that the remote starter activates the the 2nd IGN relay of the harness.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: DanDan
Date Posted: October 27, 2004 at 8:13 PM
Apparently you have not been doing this a long time as it has been common knowledge about wiring up the white wire as a second ignition for a long time. The white wire has to have 12 volts on it during start and while running or you will ruin the transmission.
DanDan
|