Holow Tube Screwdriver ?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41785
Printed Date: May 09, 2025 at 1:20 PM
Topic: Holow Tube Screwdriver ?
Posted By: silvercivicsir
Subject: Holow Tube Screwdriver ?
Date Posted: October 28, 2004 at 12:29 AM
Hi, kinda of a dumb Question, but is there a special name for the tool, that looks like a screw driver, that you use to run wire through ? ie through firewalls / Gromets ?
Replies:
Posted By: tbirdman74
Date Posted: October 28, 2004 at 12:04 PM
The one that I have is called a Thextron tool. Dont know if that is tool name or manufacturer name for sure, but you can get from Metra, and probably other sources as well.
-------------
If it don't fit, Force it.
If it breaks, You needed a new one anyway!
Posted By: audiopro111
Date Posted: October 28, 2004 at 10:35 PM
can't remember name of tool at this moment but a word of advice is don't waste your money on this tool this tool will cost u more problems in the long run or (short) this tool is known for damaging wire harnesses thru out............ TRUST ME..... good luck finding out the name! ------------- AudioPro111
Posted By: JWorm
Date Posted: October 29, 2004 at 12:31 AM
Wire insertion tool
All the tool trucks usually carry them.
I have two. One that fits 10 gauge wire, and another that will fit up to 4 gauge. Useful on some cars, you just got to be careful not to stab into a bundle of wires.
Posted By: auex
Date Posted: October 29, 2004 at 1:26 AM
You can find it here for 12 bucks as well.------------- Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: civicdownlow
Date Posted: October 29, 2004 at 7:16 PM
i js cut an old power antenna up then u have multiple sizes
Posted By: misterjimbo
Date Posted: October 29, 2004 at 8:02 PM
if you like havin the hole you can use a brake line that way you can cut it to lenght
-------------
|