Print Page | Close Window

installing a remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41793
Printed Date: July 18, 2025 at 10:46 AM


Topic: installing a remote start

Posted By: coupester02
Subject: installing a remote start
Date Posted: October 28, 2004 at 3:14 AM

i am installing a clifford rsx 3.5 alarm and Im trying to install the remote start.  I need to find out where the starter wire and the color of it from the starter not from the ignition.  can anyone help. thanks...

-------------
Tony Truong



Replies:

Posted By: NowYaKnow
Date Posted: October 28, 2004 at 7:00 AM
We need the year, make, and model of vehicle before we can help you. Also, why do you need it from the starter and not the ignition?

Edit: After reading again I'm thinking maybe your asking for the starter wire from the module itself? If so, it would be violet (-) off the actual module itself, and then off of the relay pack your looking for the purple (starter side) and green (key side).

Mike





Print Page | Close Window