Print Page | Close Window

installation procedures

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41808
Printed Date: July 17, 2025 at 10:52 PM


Topic: installation procedures

Posted By: ray0266
Subject: installation procedures
Date Posted: October 28, 2004 at 11:33 AM

So when  installing an alarm what do you do first. What are the installation steps you take? what do you hook up first and what do you do last?
this is for an alarm with keyless entry and remote start. Phoenix Digital PD-175.
The alarm is going to a 2003 pontiac grand am se.
 
Thanks for all the help.



Replies:

Posted By: thepencil
Date Posted: October 28, 2004 at 11:49 AM
Familiarized yourself with the wiring off your car and the alarm unit wiring that you are going to put in. Plan out all the wire that you will need. Tape up all those that you won’t need. Find a good location to hide the Alarm unit and start installing. Ask questions if you are unsure, DON’T ASS-U-ME. There are lots of great installer here to help you out if you are stuck.

Here is a post that you might find helpful to you.

-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image


Print Page | Close Window