hydraulics off alarm...24 volts

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41864
Printed Date: July 13, 2025 at 1:32 PM

Topic: hydraulics off alarm...24 volts

Posted By: SEXIFIED
Subject: hydraulics off alarm...24 volts
Date Posted: October 29, 2004 at 1:27 AM

if the solonoids i want to trigger need 24 volts how can i safely control them off an alarm with only 12 volt output?
good idea? bad idea?

-------------
SWEET.

Replies:

Posted By: auex
Date Posted: October 29, 2004 at 1:30 AM

Use a relay or solenoid that requires 12 volts to activate and send the 24 volt signal out from the relay. It will work you just need an extra part, the relay.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window