programming trc remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41884
Printed Date: June 20, 2025 at 11:56 PM

Topic: programming trc remote

Posted By: 12v.boogie
Subject: programming trc remote
Date Posted: October 29, 2004 at 1:39 PM

Wondering if anyone can help me with some instructions on programming a trc remote starter. not sure what model it is but i think its about 2-3 years old and the remote has four buttons on it. Any help will be great Boogie

Replies:

Posted By: mo12v
Date Posted: October 29, 2004 at 3:58 PM

Is that "The Right Connections"? 800-429-6200 ask for Tech Service
U need to get the Model Number off of the Module 1st

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: 12v.boogie
Date Posted: November 01, 2004 at 10:49 PM

nobody knows how to program a TRC remote starter??? Been dealing with this for a while now some help would be nice thanks and hope to hear from someone with any info.

Posted By: misterjimbo
Date Posted: November 02, 2004 at 8:42 AM

Does trc have a phone number or an email address I am sure they know how to program it.

-------------

Posted By: Joen
Date Posted: November 11, 2004 at 1:51 AM

12v.boogie wrote:

Wondering if anyone can help me with some instructions on programming a trc remote starter. not sure what model it is but i think its about 2-3 years old and the remote has four buttons on it. Any help will be great Boogie

To program additional transmitters. Turn Ignition ON/OFF 3 times (the parking lights will flash) Leave the ignition key in ON position. Then press the valet/program switch down for 5 seconds (parking lights flesh again), then press on the 1st button of the transmitter