2003 Accord Door Lock Trigger
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41914
Printed Date: May 10, 2024 at 7:08 AM
Topic: 2003 Accord Door Lock Trigger
Posted By: neener
Subject: 2003 Accord Door Lock Trigger
Date Posted: October 29, 2004 at 11:13 PM
I need to find the door lock and unlock triggers. I am adding a remote start to my factory keyless entry, I have this all wired up and working. What I want to do is have the door locks trigger the remote start. If I use the Pink/Black wire in the green plug by the fuse boy this will only trigger when unlocking the door from the passengers side door, not the keyless entry. I need a trigger when unlocked from the keyless entry. Does anyone know if the door lock interface (HODL2) will give me these triggers when Locked or Unlocked from the keyless entry, or do I have to go into the doors to get this wire?
Replies:
Posted By: Musicman5000
Date Posted: October 30, 2004 at 12:09 AM
Go into thegreen plug in the fusebox and look for a yellow/black wire this is lock motor wire. Depending on how you are doing it and what remote start you are using you will proablly need a relay to do it.
Posted By: Civickid01
Date Posted: October 30, 2004 at 1:39 AM
What about the pink/blue?
-------------
help?
Posted By: neener
Date Posted: October 30, 2004 at 10:12 AM
Is the yellow/black wire for lock or unlock? What is the other wire color for lock or unlock? Yes I know I need a relay I am wiring up a diagram for the remote start to work by pressing Lock->Unlock->Lock.
Posted By: Velocity Motors
Date Posted: October 30, 2004 at 12:21 PM
Using the output LOCK wire on the HODL will work for you.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Musicman5000
Date Posted: October 30, 2004 at 9:42 PM
Why do you want to have to lock unlock lock ,why dont you just use lock 3 times
Posted By: neener
Date Posted: October 30, 2004 at 9:58 PM
The remote transmitter for the Accord is built onto the key so the range is not the best. So sometimes I have to press Lock three times to get the doors to lock. Also I installed one of these on my previous car and if I hit lock twice, then hit lock an hour later the car would start, and this is not what I wanted. So I thought that the Lock->Unlock->Lock sequence to trigger the remote start would be the solution. I am using some relays to do this with a tiemer relay to allow this to work with a ceratin timeframe. Doe anyone know what the Unlock motor wire is?
Posted By: neener
Date Posted: October 31, 2004 at 5:57 PM
I found the Unlock and Lock motor wire (yellow/black and YELLOW /GREEN). These are +12v, does anyone know where the keyless entry module is, I would like to connect to that so that the remote start isn't triggered when someone presses Lock three times. I have not been able to get the Lock-> Unlock->Lock sequence to work yet, if anyone can help with that that would be appreciated. I have a post in the relay forum under: https://www.the12volt.com/installbay/forum_posts.asp?tid=41434&PN=1
Posted By: johnnydi77
Date Posted: October 31, 2004 at 6:29 PM
you can use pink/black for lock and pink/blue for unlock both are found in a green plug on the side of the fuse block to the left of the streering column. they are negative trigger and will only meter while turning the key in the door lock cylinder
-------------
John J. DiStefano Jr.
Posted By: johnnydi77
Date Posted: October 31, 2004 at 6:31 PM
pink/black is lock and pink/blue is unlock found in green plug on the side of the fuse block. they are negative trigger and will test by turning the key in the door lock cylinder
-------------
John J. DiStefano Jr.
Posted By: neener
Date Posted: October 31, 2004 at 10:28 PM
These wires will trigger when prssing unlock or lock from the passenger side door also, but this is not what I am looking for. I am not trying to trigger the door locks, I want the door locks to trigger the remote start. So what I need is wire that will show a trigger when locking or unlocking from the remote transmitter. I found the lock and unlock motor wires, but I would like to use the keyless entry triggers instead.
Posted By: hagmanti
Date Posted: November 01, 2004 at 1:49 AM
If you have the motor wires, then I don't see what the problem is. Unless the keyless entry is smart, and doesn't trigger the lock motor if it's already locked... Hmmm....
Anyway, I can't help you w/ the colors of the wires, but have to point out that if you have the timing circuit in place, then it doesn't matter what sequence you use. Lock, lock, lock doesn't run into the problem you describe above and is certainly more secure....
Me
Posted By: neener
Date Posted: November 01, 2004 at 6:09 PM
Wouldn't the Lock->Lock->Lock sequence start the car if you press the lock button inside the car three times? I don't think this is very safe or practical. I would rather to directly to the keyless entry so that when the lock button is pressed in the car three times it won't trigger the remote start.
|