Print Page | Close Window

Extending a single out put for multiple functions?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4195
Printed Date: October 31, 2024 at 6:50 PM


Topic: Extending a single out put for multiple functions?

Posted By: hiluxrunner
Subject: Extending a single out put for multiple functions?
Date Posted: October 04, 2002 at 9:27 PM

I have an Ungo G1100 it has one aux. output and its currently used to roll down back glass on vehicle. I seen on DEI website there is an output channel expander. I was wondering if i could add this to my alarm so i can have remote start and window roll down?

https://www.directed.com/security/access/oaccess.asp (webpage)

1 spare Channel +1 450T = 6 new channels! Add up to six auxiliary channels to any DEI security system, to control additional security or convenience features. Compatible with standard or high frequency systems.




Replies:

Posted By: the12volt
Date Posted: October 05, 2002 at 10:57 AM

I haven't used that particular unit, but it appears that it will work with any remote system with an auxiliary channel, and will likely work with your alarm, but you can contact them here to be sure: https://www.directed.com/contact/default.asp

the12volt






Print Page | Close Window