Tach Wire from ECU

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41959
Printed Date: June 25, 2025 at 11:50 PM

Topic: Tach Wire from ECU

Posted By: Dongtran
Subject: Tach Wire from ECU
Date Posted: October 31, 2004 at 1:08 AM

Hello all,

I am in the process of upgrading a Clifford Concept 60 in a 2000 Honda Prelude. The brain is fried. Does anybody have any recommendations to which is the easiest to upgrade to? Hopefully I can find a plug and play solution, however if I have to hack up the harness I guess that's what I'll have to do...

Replies:

Posted By: webxfx
Date Posted: October 31, 2004 at 1:09 AM

Can the tach wire from the ECU be used on remote starters?

Posted By: Javelin3o4
Date Posted: October 31, 2004 at 1:45 AM

it should be as long as it is a tach signal, ive done a car where the tach wire was located at the ECU i think it was a nissan maxima

Print Page | Close Window