hooking viper 350hv to power door locks.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41987
Printed Date: May 09, 2024 at 9:32 AM

Topic: hooking viper 350hv to power door locks.

Posted By: boyzWidToys
Subject: hooking viper 350hv to power door locks.
Date Posted: October 31, 2004 at 4:26 PM

i recently had a viper 350hv alarm installed in my truck. A week later i installed a set of power door lock actuators and want to hook it to the viper AUX button? or well what options would i have?

I tried connecting it to the DOOR LOCK PIN and it did not opporate the locks.

Do i have to REPROGRAM the viper alarm to do this?

Replies:

Posted By: mo12v
Date Posted: October 31, 2004 at 5:41 PM

Don't U have Door Lock / UNLock Outputs from the Viper? Use those, U may need 2 SPDT Relays

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: johnnydi77
Date Posted: October 31, 2004 at 6:36 PM

a 350hv has door locks built in they are green and blue. If you are using 2 wire actuators you will need 2 spdt relays. Put 12 volts to pins 87 and 86 on both ground pins 87a on both and 30 are your outputs. pins 85 are your inputs from your alarm. this is setting them up as negative trigger so green is lock and blue is unlock. make sure to fuse your 12volts

-------------
John J. DiStefano Jr.

Posted By: johnnydi77
Date Posted: October 31, 2004 at 6:39 PM

tie your like colors of the motors together for instance put your greens and blues together coming off the motors. these go to you pins 30 on your relays. put one to each pin 30. if the locks end up working backwards just flip them around

-------------
John J. DiStefano Jr.

Posted By: boyzWidToys
Date Posted: October 31, 2004 at 8:06 PM

question still stands.. do i have to program the Doorlocks options onto the alarm?

or will the DEFAULT programming work for this?

Posted By: boyzWidToys
Date Posted: November 01, 2004 at 2:34 PM

HELP help help!

Posted By: iceman88
Date Posted: November 01, 2004 at 5:44 PM

whenever you hit the ARM/DISARM button(s) on your remote that automatically activates LOCK/UNLOCK--when you ARM, doors will LOCK; when you DISARM, doors will UNLOCK. No programming needed; just hook up the wires like "johnnydi77" said.

Posted By: johnnydi77
Date Posted: November 01, 2004 at 8:04 PM

no the green and blue are already set up for lock/unlock

-------------
John J. DiStefano Jr.