Need help with LED on Alarm!

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42025
Printed Date: October 31, 2024 at 7:01 PM

Topic: Need help with LED on Alarm!

Posted By: olehoosie
Subject: Need help with LED on Alarm!
Date Posted: November 01, 2004 at 7:54 AM

Hey guys, I just finished installing my new alarm. Everything went well and work perfect. The only thing is my LED as a pulsed output. It blinks from the brain. The reason why I am writing this is I want to put a LED Scanbar on that output. But it needs constant. How do I make this work?

Replies:

Posted By: draasch
Date Posted: November 01, 2004 at 8:11 AM

do you have a grounded when armed output???

what unit did you install???

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: ampere
Date Posted: November 01, 2004 at 8:52 AM

Many alarms have a (-) outut while armed option (commonly used for a starter kill relay). In conjuntion with a relay, you can use this wire to turn on your LED scanner thing whenever the system is armed.

Let us know what the make/model of your alarm is.

Posted By: olehoosie
Date Posted: November 01, 2004 at 12:18 PM

Lnyx 2000 w/ remote start

Print Page | Close Window