Power Wire Question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42077
Printed Date: May 10, 2024 at 3:10 PM

Topic: Power Wire Question

Posted By: jonbth
Subject: Power Wire Question
Date Posted: November 01, 2004 at 10:40 PM

I'm going to install a Valet 561t remote starter on my Nissan Frontier. The module has 2 12v inputs and I'll need at least 1 and maybe 2 relays. Can I draw all my power from the 12v ignition switch wire? I think that wire is 40amp fused from the battery.

Replies:

Posted By: Ben.c
Date Posted: November 01, 2004 at 10:46 PM

You can hook up many relays to the main power supply feeding the ignition switch ( constant 12v+) . The remote start sytems wont draw any more power than your vehicle being started by the the key . Some remote start systems such as DEI use a lot of relays , I have hooked up as many a 10 relays on a sytems with many features with no problem.

-------------
ozy installer

Posted By: snguyen
Date Posted: November 02, 2004 at 8:29 AM

Make sure you fuse each connection.

Print Page | Close Window