2004 Hyundai Santa Fe Factory Disarm Wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42093
Printed Date: July 05, 2025 at 5:02 PM
Topic: 2004 Hyundai Santa Fe Factory Disarm Wire
Posted By: SoundFX411
Subject: 2004 Hyundai Santa Fe Factory Disarm Wire
Date Posted: November 02, 2004 at 9:24 AM
Does anyone know where and what color the factory alarm disarm wire is on the 2004 Hyundai Santa Fe. I installed a remote start. I was unaware of a factory alarm. The customer told me there was no alarm. When the truck is remote started it works fine, but when she opens the door to get in the alarm goes off. My software goes up to 2003 and it doesn't show any wire color. Can anyone help?
-------------
SoundFX
Replies:
Posted By: hurtado_roberto
Date Posted: November 02, 2004 at 11:16 AM
Posted By: DaRacerz
Date Posted: November 02, 2004 at 4:55 PM
Well, I just installed a viper 791 on a friends 04 santa fe with factory alarm and there is no factory alarm disarm wire.
Simply, the stock alarm was left in unlock/disarm mode, and told him to never touch the fob ever again. So far so good.
Posted By: hurtado_roberto
Date Posted: November 02, 2004 at 5:36 PM
I have a '04 hyundai elantra gt and when I leave my car the doors automaticly lock I think. I need to double check. Maybe I accidently pressed the controller or maybe it's the aftermarker starter inturupt on it.
-------------
Poly Dollies
Posted By: JWorm
Date Posted: November 02, 2004 at 11:22 PM
Most Hyundai's disarm if you power the keysense wire as a 3rd ignition. Should be brown (+) in the ignition harness on that car.
Posted By: johnnydi77
Date Posted: November 03, 2004 at 6:44 PM
Arm and disarm work only via factory remote.
-------------
John J. DiStefano Jr.
|