791XV Domeslight Supervision

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42097
Printed Date: November 05, 2025 at 4:32 AM

Topic: 791XV Domeslight Supervision

Posted By: jmr964
Subject: 791XV Domeslight Supervision
Date Posted: November 02, 2004 at 9:55 AM

Can someone with a 791XV test their domelight supervision and report back to me. What I want to know is that if after the vehicle has been remote started while the system is armed and you disarm the alarm while it is running under remote start is does the 791XV domelight supervision circuit kick on the domelights? Mine doesn't and I think it should.

Jason

Replies:

Posted By: raydawg357
Date Posted: November 02, 2004 at 10:36 AM

It works anytime the it's armed and disarmed, it doesn't matter if the the vehicle is remote started or not.

-------------
Do it right the first time

Posted By: jmr964
Date Posted: November 02, 2004 at 10:38 AM

Are you just saying this or have u verified that with a functinal 791VX?

Jason

Posted By: raydawg357
Date Posted: November 02, 2004 at 10:54 AM

I install them on a daily basis. The 791 has seperate outputs that will allow you to connect other lights (such as neon) to the remote start option, but the dome light supervision is just that... dome light supervision. When connected to your door trigger, it has no other function.

-------------
Do it right the first time

Posted By: jmr964
Date Posted: November 02, 2004 at 11:05 AM

I understand that but what I am experiencing is that the domelight supervision wire supplies the ground output fine if the vehicle is not remote started but if it is remote started it does not supply the domelight supervision ground if u unlock the doors/disarm the alarm.

Jason

Print Page | Close Window