adding horn honk to factory alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42128
Printed Date: May 24, 2024 at 8:55 AM

Topic: adding horn honk to factory alarm

Posted By: gknight8
Subject: adding horn honk to factory alarm
Date Posted: November 02, 2004 at 5:57 PM

I know this topic has been posted a zillion times, and I know I will need to take the hazard light output to drive a relay to the horn. I have a 04 hyundai tiburon and don't know where the wires are located to attach to the relay? If someone can tell me which wires, where they are located, and how to wire it to the relay would be great. Thanks

Replies:

Posted By: BrandonClaps
Date Posted: November 03, 2004 at 1:57 AM

you need to get the wire off the factory alarm, otherwise if you hook it up to your hazards, when you turn your hazards on, and possibly the parking lights/blinker your horn may honk!

Posted By: Ben.c
Date Posted: November 05, 2004 at 1:23 AM

Not really sure of your question , does the factory alarm have its on siren ?. or is it only a factory keyless entry system ?. if you could explain exactly what you mean I will try to help.

-------------
ozy installer

Posted By: go2pac
Date Posted: November 05, 2004 at 2:32 AM

Free Hyundai diagrams

-------------
Karl

Pacific Accessory Corporation
Mobile Audio Interfacing Equipment
Connecting You to Your Music Since 1976

Print Page | Close Window