Battery Replacement
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42149
Printed Date: May 09, 2024 at 11:15 PM
Topic: Battery Replacement
Posted By: tomos
Subject: Battery Replacement
Date Posted: November 03, 2004 at 1:51 AM
I am sorry if this has been asked before.
I have a Clifford Concept 100 and I need to replace the main battery in my car. I've emailed Clifford and checked their website but nowhere does it say what will happen if the system loses all power and then is plugged back in. Does anybody know if I can do this without issues? I might be able to dig out the reset code, but not quickly and this battery replacement needs to be done ASAP so the car will work and I can get to work!
-------------
What's that flippie??
Replies:
Posted By: s7726
Date Posted: November 03, 2004 at 2:16 AM
it should remember everything just fine. Keep in mind the alarm might go off when you plug it back in just be ready with the key fob to disarm it. Any decent alarm has a non volatile (sp?) memory for those situations.
-------------
Gavin
SWEDISH RICE!
Posted By: tomos
Date Posted: November 03, 2004 at 8:18 AM
Thanks for the fast response. I couldn't have asked for a better answer. Now I can get on with my install without fear. Thanks very much x
-------------
What's that flippie??
|