Print Page | Close Window

Car Alarm LED indicator

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42206
Printed Date: June 08, 2024 at 10:05 AM


Topic: Car Alarm LED indicator

Posted By: vazmaniandevil
Subject: Car Alarm LED indicator
Date Posted: November 03, 2004 at 9:56 PM

I was going to install a commando car alarm. I wanted to put the LED on top of the dash near the windshield. That way it's visible from standing in front of the car. Any ideas or suggestions on how to do that.

96 PathFinder



Replies:

Posted By: Ben.c
Date Posted: November 04, 2004 at 3:30 AM

 Hi my suggestion is to install your LED in a normal location on the dash somewere , and to add a viper flasshing alarm sticker ( can't remember part no. off hand ) thess stickers stick to the inside of your windscreen and have to wires comming off them one is wired to 12v constant and the other you hook to your alarms negative output when armed. These stickers have the vipers ( snake ) emblam on them and flash a blue colour which is very bright esspecially a night. Try finding someone who deals with DEI products but if you need the part no. I could find out for you.

Good luck.



-------------
ozy installer


Print Page | Close Window