integra with clifford 3.5 alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42220
Printed Date: July 29, 2025 at 12:13 PM

Topic: integra with clifford 3.5 alarm

Posted By: Lee_Thao
Subject: integra with clifford 3.5 alarm
Date Posted: November 04, 2004 at 3:02 AM

i was wondering if anyone knows to how install the clifford matrix 3.5 alarm into a 96 acura integra gsr. there are so many wires and i don't know which to connect and which is not needed. I also don't know if i need to wire up the diodes and resistors or not. And one more thing, i know that it's illegal to have a manual transmission to have a autostart but if someone could show me how to install that too it would be appreciated. thanks.

-------------
Lee

Replies:

Posted By: Ben.c
Date Posted: November 04, 2004 at 3:50 AM

if you go to the left hand side of the web site and look under general information and click on vehicle information you will find a search box just sect the year and make of vehicle from there and selct alarm info for your vehicle.

note its not advisable to hook up remote start to a manual but so you know the wire from your alarm for the nuetral sfaety switch must be grounded or the remote start wont work but i suggets your try to rig up some kind of spring loaded switch on your gear shifter so it only provides ground when in nuetral .( this is hard be can be done )

-------------
ozy installer

Posted By: kgerry
Date Posted: November 04, 2004 at 10:02 AM

actually DEI has a new module out that allows integration into manual vehicles, although i think it's only available in Canada.... pity

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: Lee_Thao
Date Posted: November 04, 2004 at 12:51 PM

thanks for the help, i see what i can do. in the mean time if anyone else knows a easier process of bypassing manual autostart please let me know.

-------------
Lee