86 Mustang Install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42369
Printed Date: July 03, 2025 at 11:36 AM

Topic: 86 Mustang Install

Posted By: LqDFx
Subject: 86 Mustang Install
Date Posted: November 06, 2004 at 3:12 PM

Anyone install an Alarm system in an 86 Mustang before. I am having trouble getting to the parking lights wiring and I have so little room to get to any wiring under that dash! I was hoping someone would have some advise or a trick to get to the thing.

Also, my ignition is messed up. I have a momentary button that is for the starter. The key needs to be in the run position for it to start and run, but you can attemp to start the car without the key. I did not do it, it was like that when I bought the car. Can someone tell me how to wire it up to the starter kill so that the key has to be in before the switch will get power.

Replies:

Posted By: mo12v
Date Posted: November 06, 2004 at 6:41 PM

The BROWN Parking Lite wire runs thru Firewall. If U can't get it at the switch, U can find it in the harness.
WHITE/ Pink wire probably is going to your Push Button for Start. Wire a Relay as :
https://www.the12volt.com/relays/page2.asp "Basic Starter Kill"
If U are not using an Alarm, ground PIN 85 and hook up PIN 86 to Red / Light Green @ Ignition switch

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: LqDFx
Date Posted: November 06, 2004 at 7:05 PM

So I can use the starter imoblizer in the Alarm for the switch? That way I do not have to waste another relay? I just use the one that is in the alarm right? I have a Hurricane 2 from Avaital