2004 Chevy P/U Base Model
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42384
Printed Date: April 28, 2024 at 6:30 PM
Topic: 2004 Chevy P/U Base Model
Posted By: Haku
Subject: 2004 Chevy P/U Base Model
Date Posted: November 06, 2004 at 6:47 PM
Ive got a 2004 Chevy Silverado coming in tomorrow for a remote start with keyless entry. This is a base model, without factory keyless. Will the GMDL series still work for the door locks? Or do I have to use the white, lt.blue wires? Also... if I cannot use the door lock interface, do I need to hook up a factory disarm? (Im guessing no, that the base models do not have factory alarm).. but you never know!!
If I can use the interface, then I will use a GMDL-BP (all in one), if not I will use a PLDATA.
Thanks in advance!!
-------------
Hak
Siemens Autostart
Replies:
Posted By: Haku
Date Posted: November 06, 2004 at 7:47 PM
Nobody??
-------------
Hak
Siemens Autostart
Posted By: snguyen
Date Posted: November 06, 2004 at 10:01 PM
Not sure what you mean by the white, lt.blue wires? If you are using the GMDL-BP, then you would hook your remotes start/keyless entry wire to Blue wire on the GMDL to unlock Green wire on the GMDL to lock I would use the GMDL-BP, it will save you lots of time.
Posted By: Haku
Date Posted: November 06, 2004 at 10:39 PM
Base models of the Silverado can use Lt Blue , White wires at the BCM (-) for the door locks. (as apposed to HAVING to use a interface module like the GMDL, 456G, ECT>>) I guess I over complicated the question. Just want to make sure that the door lock interface still works with the base model. The base model 2003-2004's are similar to the 1999-2002 (except the door locks are negative, not postive) I would rather use the GMDL-BP. ------------- Hak
Siemens Autostart
Posted By: Haku
Date Posted: November 07, 2004 at 2:41 PM
Does anyone know if you can use the doorlock interface module with the base model?
-------------
Hak
Siemens Autostart
Posted By: Haku
Date Posted: November 13, 2004 at 7:37 PM
Well if anyone is interested, the door lock modules work on the base model pickups as well. Even thou the wires were there to hook to, I chose to use the interface module to save time, and make a cleaner install.
-------------
Hak
Siemens Autostart
|