power door lock/unlock problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42516
Printed Date: May 08, 2025 at 5:09 PM

Topic: power door lock/unlock problem

Posted By: Lee_Thao
Subject: power door lock/unlock problem
Date Posted: November 08, 2004 at 2:28 PM

i have a 96 integra and trying to install a clifford matrix 3.5 alarm. which wires do i use for power door lock and unlock, i can't seem to figure it out. there's a relay wire that plugs into the alarm module, which has 5 wires.

violet/black - lock/unlock
GREEN/ black - lock output
WHITE/ black - lock normally closed
blue/black - unlock output
BROWN / black - unlock normally closed

i'm really confused on which wires connect where and if i don't need to use all these wires. by the way the violet/black wire have a fuse relay on it. can somebody help me ?

-------------
Lee

Replies:

Posted By: mo12v
Date Posted: November 08, 2004 at 2:32 PM

violet/black - lock/unlock to GROUND

GREEN/ black - lock output to BLACK / White

blue/black - unlock output to BLACK / Red

Others tape off

Power Lock	BLACK/ WHITE	14 PIN GRAY CONNECTOR
Power Unlock	BLACK/ RED	IN DRIVER KICK PANEL

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: Lee_Thao
Date Posted: November 08, 2004 at 3:22 PM

thanks that helped, it works now.

-------------
Lee