Remote Start wire problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42724
Printed Date: May 15, 2025 at 5:33 PM
Topic: Remote Start wire problem
Posted By: redhondapimp
Subject: Remote Start wire problem
Date Posted: November 11, 2004 at 12:45 AM
hey guess whats going on? i am new to this forum but familiar with the site, its a great site. I had a couple of quick question to ask you guess. I recently got a a spal pro start 3200, and as of now its partial installed except for a few wires. I have a problem with deactivating the remote start after i have started it and inserted the keys. There are 2 wires that i am not sure about. I am having problems with the orange wire, it says it "Ground out when running (-)" i was wondering what wire i would tap into for this? My other problem i have is the Green wire, it says "negative input" although when i ground out this wire it kills the remote start brain, but leaves the car running. i hope someone knows what to do with these. thanks for the help!
Replies:
Posted By: gcorrea
Date Posted: November 12, 2004 at 12:04 AM
ground output when running can be used to sink relays or the alarms shock sensors while the remote start is running, im not familiar with the spal system but if it kills the brain then it should shut off, is the key in the cylinder when you are grounding the input?
-------------
gcorrea
|