anti-grind relay help
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42756
Printed Date: May 10, 2025 at 5:24 PM
Topic: anti-grind relay help
Posted By: vanram
Subject: anti-grind relay help
Date Posted: November 11, 2004 at 3:08 PM
I am installing a compustar 1 wam-s starter and there is a relay on the starter output with two yellow wires,one yel/blk, one red,and one purple with a bullet crimp one the end. The instructions have no info on how to hook it up.I think it is anti-grind but am unsure of the operation.
Replies:
Posted By: Teamrf
Date Posted: November 11, 2004 at 4:22 PM
If it is a starter kill you need to find out the connections of each wire post back here and we can tell you where they go....the connections are going to be ignition(maybe the two yellow wires), ground when armed, and starter and key side of the starter. My guess would be the two yellows are ignition wires..the yellow/black is ground when armed, and red is key side, while purple is starter side.
-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
Posted By: vanram
Date Posted: November 11, 2004 at 4:31 PM
Thanks for the help but I figured it out.
|