Print Page | Close Window

it Only Starts when the key is inside

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42767
Printed Date: May 17, 2024 at 4:15 PM


Topic: it Only Starts when the key is inside

Posted By: SinX3
Subject: it Only Starts when the key is inside
Date Posted: November 11, 2004 at 5:49 PM

Why In the Nissan Murano There is a yellow whire that Is Suposivly the tach Wire But When The key Is out of The Key Switch It Doesnt turn the car on why is It that It only Starts When The Key Is Inside

-------------
They Can Hear His But Feel Yours Vermont Audio



Replies:

Posted By: auex
Date Posted: November 11, 2004 at 6:34 PM
It is because you don't understand or know what you are doing.

The tach wire only tells you how fast the engine is turning.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: SinX3
Date Posted: November 11, 2004 at 7:41 PM

Come On Ime Only 16 Ime Not A Genious My Dad Is Out Of Town.

But How DO I Get It To Work Why Doesnt It turn On Whithout the Key in the Swich



-------------
They Can Hear His But Feel Yours Vermont Audio




Posted By: auex
Date Posted: November 11, 2004 at 8:01 PM
You have not once stated what you are installing. Check your wire diagram post.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: Velocity Motors
Date Posted: November 11, 2004 at 8:06 PM
SinX3] wrote:

p>Come On Ime Only 16 Ime Not A Genious My Dad Is Out Of Town.

But How DO I Get It To Work Why Doesnt It turn On Whithout the Key in the Swich


No one ever said you were a genius. All you have to know if how to read a wiring datasheet. The other posts that you asked for the Murano information has everything required for you to complete the installation. I suggest that you read it over again.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: nava94
Date Posted: November 11, 2004 at 8:09 PM
Like auex just told you in this and other page what kind of alarm remote start are you installing? Your young and you want answers to your questions when you haven't giving us the model of the alarm your using or what you are doing to your vehicle. If you don't understand how to test a wire on the vehicle I suggest you let a professional do the job. Your dad might ground you till your 21 for damaging HIS car.




Posted By: SinX3
Date Posted: November 12, 2004 at 10:02 PM
Its Not His Its Mine If It worent mine i wouldnt be messing with it And Its A Crime Stoper Gargoile Series 2000 II

-------------
They Can Hear His But Feel Yours Vermont Audio




Posted By: snguyen
Date Posted: November 12, 2004 at 10:19 PM

sinx3, 

 You should take the advice from these folks!  But if you want to proceed, then I recommend these simple words of advice:   READ, READ, READ, PLAN PLAN PLAN.....and check all wiring with a DMM.  






Print Page | Close Window