2002 toyota celica

hey there i need a wiring diagram for a 2002 toyota celica for an alarm, any help would be appreciated

This is what I have:

Constant 12 volts	WHITE & BLACK/ RED	IGNITION SWITCH HARNESS
Ignition 12 volts	BLACK/ ORANGE	IGNITION SWITCH HARNESS
Starter	BLACK/ WHITE	IGNITION SWITCH HARNESS
Dome Light	RED / WHITE (-)	AT BODY ECU*
Trunk Pin Switch	L GREEN (-)	AT SWITCH OR DOME LIGHT IN TRUNK **
Parking Lamp	GREEN (+)	10 PIN CONN ON BACK OF FUSE BOX ***
Power Lock	BROWN	PASSENGER KICK PANEL
Power Unlock	YELLOW/BLACK	OR BODY ECU * ****

* Alternate Location Is 7 Pin White Connector In Driver Kick Panel ** Can Also Be Found At The Body ECU On Right Side Of Center Console. *** Must Remove White Junction Box To Access Parking Lt Wire. **** If Accessed in Driver Kick Panel, Requires Double Unlock Pulse. 
Negative Pulse Door Locks

Accessories
Window Up	D\ GREEN P\ BLUE @ MAIN SWITCH
Window Down	R/ LT GREEN S/ RED / BLK
Ign Key Warn	YELLOW (-)	STEERING COLUMN HARNESS
Trunk Release	N/A
OEM Horn	BLUE/BLACK (-)	STEERING COLUMN HARNESS
Headlights	RED / BLUE (-)	AT BODY ECU *
OEM Alarm Arm	N/A	NO OEM ALARM (PORT INSTALL)
OEM Alarm Disarm	N/A	PRESENT IN SCHEMATICS

* Body ECU Located On Right Side Of Center Console.
Reversal Rest At Ground Power Window Circuit

Remote Start
Tach Signal	BROWN / WHITE	AT ENGINE CONTROL MODULE*
Ignition #2	BLUE/RED	IGNITION SWITCH HARNESS
Ignition #3	N/A
Accessory	GRAY	IGNITION SWITCH HARNESS
Neutral Safety	NOT GROUNDING TYPE -	OEM SWITCH OPENS STARTER CIRCUIT
Brake Light	GREEN / WHITE (+)	AT SWITCH ABOVE BRAKE PEDEL
Reverse Light	RED / BLACK (+)	AT SWITCH ON TRANSAXLE
Rear Window Defrost	N/A	TIMER BUILT INTO SWITCH

*Engine Control Module Is Located In Front Of Car Battery And Has 4 Connectors. Alternate Location - In 14 Pin Conn. At Junction Block On Pass. Side Of Center Console, Under The Radio

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.