98 Acura 2.5 TL Problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42829
Printed Date: July 18, 2025 at 3:34 AM

Topic: 98 Acura 2.5 TL Problem

Posted By: thousandandone
Subject: 98 Acura 2.5 TL Problem
Date Posted: November 12, 2004 at 9:59 AM

Hi,
After I install the starter into this car. Everything working: Start, Lock/Unlock. The problem is: Can't shift. Does matter what I try. Using key, using factory remote to lock/unlock, remove starter module fuse, reset car battery. Still can't shift.
For the Power lock/ unlock wire, I opened the driver side switch to get the wire not using the one in wiring database

My starter module is the first basic one(AS-1414SR) in this webpage:
https://206.47.191.115/htmlpic.nsf/FramesetCE

Need help please

-------------
Autostar

Replies:

Posted By: Velocity Motors
Date Posted: November 12, 2004 at 7:38 PM

Make sure that your getting 12 volts on the brake wire as bobk suggests. Test with a DMM

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: fbird08
Date Posted: November 12, 2004 at 11:33 PM

This may be obvious but check all your fuses. I know on the brand new camry's there is a 5A fuse that blows occasionally for whatever reason, even if nothing is installed in the car. This 5A fuse controls the actuator that unlocks the shifter.

-------------
Money is just paper
Power is fleeting
But your word is everything,
If your word means nothing,
You are nothing...think about it