Print Page | Close Window

Alpine alarm Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42892
Printed Date: May 13, 2025 at 12:51 PM


Topic: Alpine alarm Remote Start

Posted By: abtweedy84
Subject: Alpine alarm Remote Start
Date Posted: November 13, 2004 at 12:57 PM

I am trying to find out if it is possible to wire a remote start system to an Alpine SEC-100s Alarm system in a way so that it will only use the alpine remote. I would like not to have to carry two remote controls around with me everywhere. Best buy says that it is possible but for insurance purposes they cannot do it so i am on my own. Any help would be greatly appreciated.




Replies:

Posted By: MJA1962
Date Posted: November 13, 2004 at 1:33 PM

If the vehicle has power door locks which are controlled by the Alpine remote, you can use the Alpine remote to trigger a remote starter.  DesignTech has a model specifically designed for this purpose, and I am sure other manufacturers offer the same functionality.  On the DesignTech unit for example, the remote starter is triggered by sending two lock (or unlock) signals within 3 seconds.  It seems like a lot of the people who post here regularly don't like the DesignTech units, but I've had good results with them.

https://www.designtech-intl.com:8080/merchant.ihtml?pid=1&lastcatid=18&step=4

-MIchael


Print Page | Close Window