unlock problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42896
Printed Date: May 13, 2025 at 8:38 AM

Topic: unlock problem

Posted By: UncleJohnzy
Subject: unlock problem
Date Posted: November 13, 2004 at 1:59 PM

Any idea? unlock requires 2 pulse instead of single pulse to ativate as I test with the meter. I used commando alarm and install in lexus 92. Help Please

Replies:

Posted By: gus1
Date Posted: November 13, 2004 at 5:05 PM

Ummm... program it for double pulse unlock? If it is not capable, then use the DEI 452T pulse generator to generate the double pulse needed for unlock.

Gus

-------------
Wherever I go, that is where I end up......

Posted By: UncleJohnzy
Date Posted: November 13, 2004 at 5:30 PM

thing is, I lost the manual. beside, it works fine with single pulse for about 6 mons. wonder if I had wired it wrong...

Posted By: UncleJohnzy
Date Posted: November 14, 2004 at 2:49 PM

Any help with the diagram ,,, Please

Print Page | Close Window