wiring the windows in a 1990 4Runner
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42913
Printed Date: May 10, 2024 at 8:43 AM
Topic: wiring the windows in a 1990 4Runner
Posted By: rghrdr18
Subject: wiring the windows in a 1990 4Runner
Date Posted: November 13, 2004 at 8:50 PM
I am putting in the DEI 791 with 3 DEI 530t's, one for each front and rear windows, plus one for the sunroof and tailgate window. I am in need of the wires for the windows, sunroof, and tailgate and where to find the last two, because I am sure that I can just tap into the door for the front and rear windows, but what do I do for the sunroof and tailgate window? If some one could get me the correct wires so as I do not have to search for them, that would be great. Thanks again for helping.
Also, for the "ground when armed" wire, all I have to do is ground it correct? There is also a WHITE/ blue wire on the 791 for remote start input, what is that wire for?
Also, where would I find the neutral safety switch if it is an automatic? And the tach is said to be found on the Diagnostic Connector, and I cannot seem to find it.
Please help. Thanks again.
Replies:
Posted By: MJA1962
Date Posted: November 15, 2004 at 10:28 AM
"ground when armed" is an output, not an input. Unless you need to use it, don't worry about it.
|