Viper Alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42921
Printed Date: May 13, 2024 at 1:30 PM

Topic: Viper Alarm

Posted By: kickthextant
Subject: Viper Alarm
Date Posted: November 13, 2004 at 9:40 PM

I put a Viper 941 in a 1999 Jeep. Everything went together great. The problem i am having is the transponder will not learn the remote buttons. The transmitter remote shows it is recieving a signal, but will beep with a no signal sign after the cherp. WTH! It is angering me.

-------------
I was going to try procrastination but I never got around to it...

Replies:

Posted By: gus1
Date Posted: November 13, 2004 at 10:05 PM

Hmmm.... I am thinking this may be a 791XV?????? Perhaps?? Anyways, take the remote apart, and see if the daughter board has loose connections to the main board. a 5 pin and a 3 pin connector.......

Gus

-------------
Wherever I go, that is where I end up......

Posted By: Teamrf
Date Posted: November 13, 2004 at 10:46 PM

There was a recall on the white remotes for viper, and clifford. If that is the one you have send it in to DEI

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: kickthextant
Date Posted: November 14, 2004 at 4:22 PM

yeah it's the 791. It has the carbon fiber clifford matrix transponder with it.

-------------
I was going to try procrastination but I never got around to it...

Print Page | Close Window