TR-10 Trunk

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42959
Printed Date: May 14, 2025 at 11:30 PM

Topic: TR-10 Trunk

Posted By: vazmaniandevil
Subject: TR-10 Trunk
Date Posted: November 14, 2004 at 2:05 PM

Does anyone have any experience on installing a TR-10 trunk release from car commmando. Bought it and it came with little to no instructions. A diagram would have been nice.

Replies:

Posted By: draasch
Date Posted: November 14, 2004 at 9:31 PM

are you adding the trunk release from scratch???

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: vazmaniandevil
Date Posted: November 15, 2004 at 6:05 AM

I don't quite understand the "from scratch". This is what I'm doing... The car has manual doors, so I'm changing that to power doors. Since I'm doing that I want to add a power trunk release.I can figure out the wiring, but I can't figure out how to attach the solenoid to the catch mechanism. I know I have to attach the medal string, but I have a blue clip and a little bar with a nut in the middle. What do I do with that?

Posted By: draasch
Date Posted: November 15, 2004 at 10:05 PM

you have to get creative on the mounting.....as for the wiring, there will be two wire....one for power and one for ground.....you can ground the motor at the trunk when you mount it.........run the power to the front and tie it into your alarm......

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Print Page | Close Window