OEM keyless entry Receiver location 98 GM
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42962
Printed Date: June 15, 2024 at 2:34 PM
Topic: OEM keyless entry Receiver location 98 GM
Posted By: mastiff
Subject: OEM keyless entry Receiver location 98 GM
Date Posted: November 14, 2004 at 3:21 PM
Would someone please tell me where the OEM keyless entry receiver( BCM?) is located on a 98 GMC truck I think mine has died as the remotes will not unlock/ lock the doors. This is the last thing I need to check, all the fuses are good and the locks work from the door switches. It just died all the sudden. Thank you Mastiff ------------- Take care of business or business will take care of you.
Replies:
Posted By: mastiff
Date Posted: November 14, 2004 at 3:35 PM
ok dont know why the above happend but please read below Would someone please tell me where the OEM keyless entry receiver is located on a 98 GMC truck I think mine has died as the remotes will not unlock/ lock the doors. This is the last thing I need to check, all the fuses are good and the locks work from the door switches. It just died all the sudden. Thank you Mastiff ------------- Take care of business or business will take care of you.
Posted By: mastiff
Date Posted: November 14, 2004 at 3:36 PM
Would someone please tell me where the OEM keyless entry receiver is located on a 98 GMC truck I think mine has died as the remotes will not unlock/ lock the doors. This is the last thing I need to check, all the fuses are good and the locks work from the door switches. It just died all the sudden. Thank you Mastiff ------------- Take care of business or business will take care of you.
Posted By: mastiff
Date Posted: November 14, 2004 at 4:19 PM
ok seeing how i messed up the above post a 98 gmc reg cab truck, does it have a bcm for OEM keyless or does the keyless have a reciver? also need the location of this magic black box please. reason = keyless entry dead but pwr door locks still work at the door switch any help would be greatly appreciated. ------------- Take care of business or business will take care of you.
Posted By: mo12v
Date Posted: November 14, 2004 at 6:25 PM
| Power Lock | L BLUE | DRIVER KICK | | Power Unlock | WHITE | PANEL ** |
** Without OEM Keyless Entry - Reversal Rest At Ground Door Locks With OEM Keyless Entry - Positive Pulse Door Locks | RKE Module | BEHIND DRIVER DASH ABOVE AND TO THE RIGHT OF THE STEERING COLUMN. |
| OEM Relays | BEHIND DRIVER DASH ABOVE BRAKE PEDAL |
------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mastiff
Date Posted: November 14, 2004 at 6:58 PM
thank you, just one more question is it common for the RKE Module to go bad?
-------------
Take care of business or business will take care of you.
Posted By: mo12v
Date Posted: November 14, 2004 at 10:09 PM
Not sure about common...........Anything is possible. I would want to check your Remotes first. Your local Alarm shop should have a frequency / signal checker to see if they are sending signal. You might even try programming them first.
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mastiff
Date Posted: November 14, 2004 at 10:33 PM
this is what i have done so far. 1 checked fuses = good 2 used two differnt remotes one was a spare that came with the truck end result = nothing still not working. i will try the reprogamming thing next thank you for the help once again. ------------- Take care of business or business will take care of you.
Posted By: Jediknight1274
Date Posted: November 15, 2004 at 8:31 AM
ok this might sound stupid, but make sure the batteries in your transmitter are still good, i've personally never seen one of these mods go bad. And they are typically DEI made.
-------------
SMCinMD
|