karr alarm 2040
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43002
Printed Date: July 15, 2025 at 2:52 PM
Topic: karr alarm 2040
Posted By: elchoco
Subject: karr alarm 2040
Date Posted: November 14, 2004 at 10:26 PM
Replies:
Posted By: Elizstoy
Date Posted: November 15, 2004 at 9:49 AM
OK HERE GOES.
RED. 12V PARKING LIGHT INPUT (+)
WHITE. PARKING LIGHT OUTPUT (+)
PURPLE. POSITIVE (+) DOOR INPUT
BLUE. NEGATIVE (-) TRUNK OUTPUT (CURRENT LIMITED)
GREEN / WHITE. DOME LIGHT SUPERSVISION (1 OF 2 #30)
BLACK/ WHITE. NEGATIVE (-) HORN OUTPUT (CURRENT LIMITED)
GREEN / WHITE. DOME LIGHT SUPERVISION (2 of 2 #87)
RED / WHITE. 12V ALARM INPUT (+)
WHITE/ BLACK. 12V SIREN OUTPUT (+)
BLACK. SYSTEM GROUND (-)
BROWN. (-) NEGATIVE DOOR INPUT
YELLOW. IGNITION INPUT (+)
GREEN. TRUNK INPUT (-)
ORANGE. STARTER KILL OUTPUT (-)
IF YOUR WORKING ON A CAR THAT HAS NEGATIVE LATCH TRIGGERS, YOU WOULD PUT ONE OF GREEN / WHITE TOGETHER WITH GROUND. AND THE OTHER GREEN / WHITE TOGETHER WITH THE BROWN WIRE OF THE ALARM. THIS WILL GIVE NEGATIVE SIGNAL TO TURN ON THE DOMELIGHT IF ITS A NEG DOMELIGHT AND NEGATIVE DOOR LATCH
IF YOUR WORKING ON A CAR THAT HAS POSITIVE DOOR LATCH TRIGGERS, YOU WOULD PUT ONE OF THE GRN/WHT WITH BATTERY (RED WIRE) AND THE OTHER GRN/WHT WITH PURPLE (POSITIVE DOOR LATCH WIRE OF THE ALARM) IF POSITIVE IS REQUIRED TO TURN ON YOUR DOME LIGHT.
HERES ANOTHER EXAMPLE..FOR INSTANCE, FORD EXPLORER1998.
IF YOU PREFER TO TAG THE LT.BLUE/WHITE(NEGATIVE DOOR TRIGGER) INSTEAD OF THE BLACK/ BLUE(DOME LIGHT DELAY WIRE). YOU WOULD TAG YOUR BROWN FROM THE ALARM TO THE NEGATIVE DOOR TRIG(LT.BLUE/WHT) AND USE ONE OF THE GRN/WHT TO POWER(B+) AND THE OTHER GRN/WHT ALONE TO THE POSITIVE DOME LIGHT WIRE.
HOPES THIS ALL MAKES SENSE.
THE GRN/WHT IS AN OUTPUT SIGNAL FROM THE ALARM, SO WHICH EVER GRN/WHT YOU PUT TO EITHER B+. OR NEG(GROUND). YOU WILL GET THAT SIGNAL ON THE SECOND GRN/WHT
-------------
RED. 12V PARKING LIGHT INPUT (+)
WHITE. PARKING LIGHT OUTPUT (+)
PURPLE. POSITIVE (+) DOOR INPUT
BLUE. NEGATIVE (-) TRUNK OUTPUT (CURRENT LIMITED)
GREEN / WHITE. DOME LIGHT SUPERSVISION (1 OF 2 #30)
BLACK/ WHITE. NEGATIVE (-) HORN OUTPUT (CURRENT LIMITED)
GREEN / WHITE. DOME LIGHT SUPERVISION (2 of 2 #87)
RED / WHITE. 12V ALARM INPUT (+)
WHITE/ BLACK. 12V SIREN OUTPUT (+)
BLACK. SYSTEM GROUND (-)
BROWN. (-) NEGATIVE DOOR INPUT
YELLOW. IGNITION INPUT (+)
GREEN. TRUNK INPUT (-)
ORANGE. STARTER KILL OUTPUT (-)
IF YOUR WORKING ON A CAR THAT HAS NEGATIVE LATCH TRIGGERS, YOU WOULD PUT ONE OF GREEN / WHITE TOGETHER WITH GROUND. AND THE OTHER GREEN / WHITE TOGETHER WITH THE BROWN WIRE OF THE ALARM. THIS WILL GIVE NEGATIVE SIGNAL TO TURN ON THE DOMELIGHT IF ITS A NEG DOMELIGHT AND NEGATIVE DOOR LATCH
IF YOUR WORKING ON A CAR THAT HAS POSITIVE DOOR LATCH TRIGGERS, YOU WOULD PUT ONE OF THE GRN/WHT WITH BATTERY (RED WIRE) AND THE OTHER GRN/WHT WITH PURPLE (POSITIVE DOOR LATCH WIRE OF THE ALARM) IF POSITIVE IS REQUIRED TO TURN ON YOUR DOME LIGHT.
HERES ANOTHER EXAMPLE..FOR INSTANCE, FORD EXPLORER1998.
IF YOU PREFER TO TAG THE LT.BLUE/WHITE(NEGATIVE DOOR TRIGGER) INSTEAD OF THE BLACK/ BLUE(DOME LIGHT DELAY WIRE). YOU WOULD TAG YOUR BROWN FROM THE ALARM TO THE NEGATIVE DOOR TRIG(LT.BLUE/WHT) AND USE ONE OF THE GRN/WHT TO POWER(B+) AND THE OTHER GRN/WHT ALONE TO THE POSITIVE DOME LIGHT WIRE.
HOPES THIS ALL MAKES SENSE.
THE GRN/WHT IS AN OUTPUT SIGNAL FROM THE ALARM, SO WHICH EVER GRN/WHT YOU PUT TO EITHER B+. OR NEG(GROUND). YOU WILL GET THAT SIGNAL ON THE SECOND GRN/WHT
-------------
Posted By: elchoco
Date Posted: November 16, 2004 at 2:37 AM