Print Page | Close Window

Coil ring from Bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43053
Printed Date: May 26, 2024 at 3:22 AM


Topic: Coil ring from Bypass

Posted By: srusin1
Subject: Coil ring from Bypass
Date Posted: November 15, 2004 at 4:58 PM

Im installing a remote start in a 2002 galant and have a question on the pku-mit. How do you wrap the coil wire aroung the key cylinder. This is the first time i had to use the transponder bypass with the coil. Where exactly does the wire go. Any pics of the install.



Replies:

Posted By: forbidden
Date Posted: November 15, 2004 at 6:06 PM
The wire is looped directly around the ignition cyclinder. Make sure that you place it as close to the front of the cylinder as possible. Once the wires have been wrapped you can black tape them in place.

-------------
Top Secret, I can tell you but then my wife will kill me.


Print Page | Close Window