need help with wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43093
Printed Date: May 28, 2024 at 3:48 PM

Topic: need help with wiring

Posted By: mikee2122002
Subject: need help with wiring
Date Posted: November 15, 2004 at 11:51 PM

can some one tell me what wires go where on the by pass kit to the alarm and from the alarm to the car please help i been working on this for 3 days now. i have a 1997 grand am gt. I am going to start with the alarm i have a nitro bmw2-way i need help to hook this thing up. which wires i need only for to use remote start

Replies:

Posted By: profuse007
Date Posted: November 16, 2004 at 12:28 AM

you can start by checking this linkfor ur car's diagram.

as far as helpin you w/ which wire goes w/ what, post the diagram of the nitro unit.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: mikee2122002
Date Posted: November 16, 2004 at 8:07 AM

ok i got the wiring diagram but what do i hook the (-) ign input (ground when running) on the bypass module where to i hook that wire up to can i hook it up to just a ground

Posted By: jrilla
Date Posted: November 16, 2004 at 10:37 AM

what bypass do you have. Look in the manual for the remote starter ther should be a (-) when running wire.

-------------
J Rilla

Owner/Installer

Posted By: mikee2122002
Date Posted: November 16, 2004 at 1:10 PM

i have a crimestopper rs-gmataII by pass module

Print Page | Close Window