Print Page | Close Window

1995 Mazda Millenia Factory Alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43152
Printed Date: July 19, 2025 at 3:06 AM


Topic: 1995 Mazda Millenia Factory Alarm

Posted By: elenors
Subject: 1995 Mazda Millenia Factory Alarm
Date Posted: November 16, 2004 at 8:16 PM

I am putting the security system right now. However after I pluged every wire, I did tried to remote lock and unlock.
I can lock all doors with factory secutity. But when I try to unlock the doors, Factory security (Horn) will be On.

I connected After market Alarm's lock wire with 1000ohm resister and unlock wire on one same wire( at Driver's kick panel)

How can I disarm the Factory security system when I unlock the doors?




Replies:

Posted By: ninjazx6e
Date Posted: November 16, 2004 at 9:35 PM
send a negative trigger to the light GREEN/ red in the drivers door harness or a positive trigger to the blue / YELLOW key sense wire in the steering column


Print Page | Close Window