resistor values 2000 dodge neon

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43230
Printed Date: May 04, 2024 at 1:04 PM

Topic: resistor values 2000 dodge neon

Posted By: isus
Subject: resistor values 2000 dodge neon
Date Posted: November 17, 2004 at 7:27 PM

Can anyone tell me what the resistor values are for the lock and unlock functions on the 2000 dodge neon.

thanks

Replies:

Posted By: TY1378
Date Posted: November 17, 2004 at 7:47 PM

Lock is negative trigger thru a 1K ohm resistor, unlock is negative thru a 250 ohm resistor. If vehicle has factory alarm, use negative trigger thru a 2.7K ohm resistor for arm/lock, and negative thru a 7.5K ohm resistor for disarm/unlock, use double pulse for unlock.

-------------
TY1378

Posted By: isus
Date Posted: November 17, 2004 at 9:18 PM

I have the factory alarm Sentery system and I tried using a 2.7 k ohm and a 7.5 k ohm and it still wont work correctly. The factory system wont arm at all. I was thinking about going off of the lock and unlock wires off of the factory remote keyless entery module under the dash. The arm/lock wire is ORANGE / black and the driver unlock is pink/black the other door unlock wires are pink/violete. Do you think I will need to use resistors for this? is this something I should do?

Print Page | Close Window