General ...about window controllers

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43280
Printed Date: May 13, 2025 at 12:59 PM

Topic: General ...about window controllers

Posted By: srisner
Subject: General ...about window controllers
Date Posted: November 18, 2004 at 1:29 PM

I was investigating whether I would want a remote window controller and my decision is based on how it would operate, or if I even can.

In general do these devices operate in such a manner, that it takes 1 or 2 of your keyless entry programmable outputs to operate all your windows and if so, What typical sequences of clicks are used to select the operation (up/down) and select the window. A sequence in terms of p1, p2, given that I have 3 programmable outputs and 1 or 2 of these are all already mapped.

Replies:

Posted By: auex
Date Posted: November 18, 2004 at 2:41 PM

Well window up is usually done with the ground when armed wire and window down will take up one of your outputs.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: srisner
Date Posted: November 18, 2004 at 5:11 PM

Is there a install manual or document online that I can view to describe the operation. I have only been able to find alarm and keyless entry system online manuals