fuel cut off wit remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43304
Printed Date: September 09, 2025 at 3:39 PM
Topic: fuel cut off wit remote start
Posted By: nycfinesteg
Subject: fuel cut off wit remote start
Date Posted: November 18, 2004 at 10:24 PM
i am wanting to add a manual fuel cut off switch in my car but I still want the remote start to work. I know that it can work with a simple relay but I am unsure about how to hook the wires up. Basically this is what I want it to do: 1. If the remote start is used, then allow the vehicle to start regardless of position of the manual switch 2.If the key is used to start, then the manual switch will need to be set to "on" in order to allow fuel pump to get power. i am using a prestige aps996 alarm in a 5 speed car 94 civc ...wat do i have to do to do this thanks pm me or email me nycfinesteg@aol
Replies:
Posted By: daniel2002p
Date Posted: November 18, 2004 at 10:58 PM
Ok, your alarm should have a ground while start sire output, it is a BLACK / YELLOW in the harness located right next to the main harness. Get a regular relay and do this: 85 - 12v Ign Fused 86 - Inline a toggle swith and ground the wire, also hook up the BLACK / YELLOW wire right before the relay. Like this: 85 - _____________________ Togggle Swith ________________ BLACK / YELLOW hooked up to this side. 30 - one side of the fuel injection wire 87a - other side of the fuel injection wire Hope this helps. ------------- 2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
Posted By: jrilla
Date Posted: November 18, 2004 at 11:12 PM
Umm, won't that open the fuel injection wire during a remote start procedure making it difficult for the vehicle to start during a remote start procedure? What he wants is basically a Normally Open Starter Kill (Diagram #2).
I emailed you some suggestions nycfinesteg.
------------- J Rilla
Owner/Installer
Posted By: daniel2002p
Date Posted: November 19, 2004 at 7:15 AM
85 - 12v Ign Fused 86 - Inline a toggle swith and ground the wire, also hook up the BLACK / YELLOW wire right before the relay. Like this: 85 - _____________________ Togggle Swith ________________ BLACK / YELLOW hooked up to this side. 30 - one side of the fuel injection wire 87 - other side of the fuel injection wire Sorry about that, thanks for pinting it out. ------------- 2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
Posted By: jrilla
Date Posted: November 19, 2004 at 8:22 AM
No Problem
-------------
J Rilla
Owner/Installer
Posted By: nycfinesteg
Date Posted: November 20, 2004 at 10:28 AM
thANKS GUYS BUT QUESTION 85 - _____________________ Togggle Swith ________________ BLACK / YELLOW hooked up to this side. SO DO I CONNECT BLACK AND YEL BEFORE THE TOGGLE SWITCH TO 85 OR AFTER
Posted By: daniel2002p
Date Posted: November 20, 2004 at 5:33 PM
Before, so you are going to have it like this: 85 - BLACK / YELLOW - Toggle swith First is the relay, then the BLACK/ yell wire is connected to it, and then the toggle swith. Let me know how it works out :) ------------- 2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
|