Print Page | Close Window

hood pin and truck pin help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43342
Printed Date: June 08, 2024 at 12:42 AM


Topic: hood pin and truck pin help

Posted By: mikee2122002
Subject: hood pin and truck pin help
Date Posted: November 19, 2004 at 2:29 PM

now that i have everything done i want to hook up a trunk and hood trigger what i need to do for that i want to be able to set the alarm off if i open my trunk on a 97 grand am



Replies:

Posted By: Velocity Motors
Date Posted: November 19, 2004 at 5:28 PM

For the hood you will need a hood pin switch and attach it to the (-) hood pin input of the alarm. The trunk pin you can grab at  the light in trunk and look for the ORANGE / black wire. THis is a (-) trigger and attach this to the (-) input for the trunk trigger. If you do not have a (-) trunk trigger input you can share the hood pin input but diode isolate the two wires from each other like this diagram show:

posted_image



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window