03 protege standard
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43343
Printed Date: September 06, 2025 at 4:47 PM
Topic: 03 protege standard
Posted By: partyguy
Subject: 03 protege standard
Date Posted: November 19, 2004 at 2:49 PM
wonderin if someone can help me i have a 2003 mazda protege with a 5 speed i installed a r/s but i can't get the unit to start any ideas its like the unit is dead but when i enter ready mode and get out of the car the unit works i can shut it down no prob but when i go to start it theres nuthin??
Replies:
Posted By: Velocity Motors
Date Posted: November 19, 2004 at 5:26 PM
Did you use a universal bypass module to bypass the Immobilizer key ? If the car stays running after you leave in ready mode, you have all the correct wires, it's the bypass that is not working. Also, if your not getting any response from the car after you remote start, make sure that you have the starter output of the remote start to the motor side of the starter disable relay ( if you installed it ).
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: partyguy
Date Posted: November 20, 2004 at 6:42 PM
i hear ya but there is no factory antitheft in this car just a plain old steel key but also there is a mazda alarm installed aftermarket i'm wonderin if this is the problem??
Posted By: partyguy
Date Posted: November 20, 2004 at 6:45 PM
ae ya sayin the alarm might have astrt kill on it and thats why its not workin? i was maybe thinkin the parking brake wire may be positive instaed of neg i'll have to check tomorrow its a buddies car and i'm finishin it up tomorrow thanks jeff for any input
|