light flash on classic car
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43504
Printed Date: April 29, 2024 at 2:09 PM
Topic: light flash on classic car
Posted By: 64SS
Subject: light flash on classic car
Date Posted: November 21, 2004 at 7:28 PM
Ok, I am installing my alarm on a 64 chev, now the light flash is only a 2 wire hook up, but the car has no 4 way flashers, and the park lamp circuit it only to the front and not connected to the rear signals. Now the signals are only 1 wire to each side. How can i wire this in so I get all 4 corners to flash.
thanx
Replies:
Posted By: larkster
Date Posted: November 21, 2004 at 7:57 PM
for an alarm system.there is no rear park lights it should be a brown wire at head light switch for park lights. if you wanna flash the signal brake wires in the rear just diode isolate the parklight flash wire for the front park lights to the brake light switch cold side. then the brake lights will flash in the rear,
Posted By: larkster
Date Posted: November 21, 2004 at 7:58 PM
for an alarm system.there is no rear park lights ?it should be a brown wire at head light switch for park lights. if you wanna flash the signal brake wires in the rear just diode isolate the parklight flash wire for the front park lights to the brake light switch cold side. then the brake lights will flash in the rear,
Posted By: larkster
Date Posted: November 21, 2004 at 8:01 PM
There is no rear parklights? It should be brown at the headlight switch. If you wanna flash the brake/signal lightsin the rear just diode isolate the parklight flash for the front to the cold side of the brake light switch.
Posted By: larkster
Date Posted: November 21, 2004 at 8:05 PM
sorry about that i dont know what happened there? with the multiple posts.
Posted By: 64SS
Date Posted: November 22, 2004 at 12:31 AM
 , what about something like this, and change the fused 12v to the alarm light flash +, and have it go to the left and right directional circuits instead??
Posted By: 64SS
Date Posted: November 22, 2004 at 12:36 AM
larkster wrote:
There is no rear parklights? It should be brown at the headlight switch. If you wanna flash the brake/signal lightsin the rear just diode isolate the parklight flash for the front to the cold side of the brake light switch.
I'll look into this more, thanx
Posted By: 64SS
Date Posted: November 22, 2004 at 1:18 AM
Ok I found the power wire off my light switch, and the lead wire fro the front park lamp, now there is a one common wire off the light switch that goes to all the rear brake lights. Now the lights are all wired in series and actually ground to the sockets so can I run a lead off of the park lamp trigger wire and use a diode to connect to the rear brake light lead??
thanx
|