1996 rover 200 central locking
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43551
Printed Date: May 22, 2024 at 12:08 AM
Topic: 1996 rover 200 central locking
Posted By: joe_1
Subject: 1996 rover 200 central locking
Date Posted: November 22, 2004 at 1:32 PM
i have fitted a clifford concept 450 to this car but i canot get the central locking to work from the clifford key fob i have used the diagrams off this site but still no luck im not sure if there is a problem with the relay in the alarm unit. can anyone let me know if they have any ideas on this thanks.
Replies:
Posted By: naughtydog
Date Posted: November 22, 2004 at 2:26 PM
How have you wired the locking...they are either motor interupt or you have to add a slave motor in the drivers door depending if the vehicle has original factory remote locking or not.
Posted By: joe_1
Date Posted: November 22, 2004 at 3:28 PM
the car has original remote locking i think that i am going to have to put a slave motor in the door to operate the factory locks but there is no room at all in the door so i did want to try and get the clifford alarm to operate the factory system. thanks for the reply
|