Q: clifford install, need to get on track
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43596
Printed Date: July 15, 2025 at 2:54 PM
Topic: Q: clifford install, need to get on track
Posted By: Cinpro
Subject: Q: clifford install, need to get on track
Date Posted: November 22, 2004 at 10:18 PM
well I really need to get back on track. work has been dominating all of mt time lately and I haveint been work on the alarm like I am supposed to be.
this is the clifford 850. i have all of harness 1 run, the prox and the omni sensors in place. I do not have the starter kill installed yet. do to I want to be able to start my own car the next morning. I wa haveing trouble locating the right wires, which have now been found. out of couriosity I plugged everything in. I belive it is arming and then disarming. it beeps 4 times then a pause and then 4 more times. I refd. my manual the only other things in there were a 2 beep pause 4 beep and a 3 beep pause 4 beep.
the only power anything in the car right now is the steering lol. is it posable that the brain is giving me an error due to the starter kill not being wired yet? or maybe I have another wire out of place. this is my first alarm so I am taking my time. I just didn't plan on this much time. Like I said b4 work is busting my butt good right now.
Replies:
Posted By: raydawg357
Date Posted: November 23, 2004 at 9:08 AM
What type of vehicle is it?
-------------
Do it right the first time
Posted By: Cinpro
Date Posted: November 23, 2004 at 8:37 PM
It is a 2002 cavalier coupe
I do have the chart with the wire colors, one thing I found on my own.
|