Print Page | Close Window

push button start/stop

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43715
Printed Date: May 17, 2025 at 2:01 AM


Topic: push button start/stop

Posted By: j.a.kelly
Subject: push button start/stop
Date Posted: November 24, 2004 at 3:28 PM

I am looking at wiring in a momentary button that will start AND stop my engine? Is this possible and if so how?

I will still be using my key for the ignition.

thanx in advance

JK



-------------
Thanx 4 your time



Replies:

Posted By: Sandungero24
Date Posted: November 24, 2004 at 10:36 PM
posted_image



Posted By: Mwsounds
Date Posted: January 05, 2005 at 9:46 PM
This can also be done if you have a DEI alarm. Just connect the White with blue stripe wire to one side of a momentary switch then  connect the other side to ground.

-------------
Thanks,
Mike Ward
Get it done right the first time!


Print Page | Close Window