Code Alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43731
Printed Date: May 15, 2024 at 3:14 PM
Topic: Code Alarm
Posted By: Falcon 1
Subject: Code Alarm
Date Posted: November 24, 2004 at 7:17 PM
I have a 94 Thunderbird with a code alarm installed by the ford dealer. I don't have the manual anymore and do not know how to correct this problem. The alarm will auto arm once the last door is closed upon exiting the vehicle but if the door is opened when armed the alarm is not triggered and no siren will sound. If you arm the system with remote after exiting and then open the door the alarm will sound. Is there some programming that needs to be done and how in order for the doors to be protected after the system auto arms?
-------------
Do it right the first time, only a doctor can bury his mistakes.
Replies:
Posted By: swamprat323
Date Posted: November 24, 2004 at 7:27 PM
How long do you wait after it arm itself before you open the door. May take 30 to 60 secs before it armed.
Posted By: Falcon 1
Date Posted: November 24, 2004 at 7:29 PM
I have tried waiting still the same result.
-------------
Do it right the first time, only a doctor can bury his mistakes.
|