Rattler 369d
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43933
Printed Date: July 12, 2025 at 10:23 PM
Topic: Rattler 369d
Posted By: 91cpe
Subject: Rattler 369d
Date Posted: November 27, 2004 at 9:05 PM
Does this R/S kit have an input wire so that I can use it with another alarm previously installed? I'd like to connect it to one of the outputs of the viper 800 esp I have on my truck so I could trigger the R/S with the same remote.
I've tried looking at the install manual, which lists a WHITE/ blue wire as an activation input(-) but there is nothing else listed about it in the manual. Would this be the correct wire?
Is there a better way to R/S to this alarm? Getting cold around these parts.
Thanks
Replies:
Posted By: wblakes
Date Posted: November 27, 2004 at 9:21 PM
i believe that's the wire for dei remote starts.
Posted By: badasscarguy7
Date Posted: November 27, 2004 at 10:20 PM
that's the one. There is also a sensor shunt wire on the 800 esp you can hook up the blue/black from the 369d to it to bypass the shock sensor while remote starting (cool feature)
Posted By: 91cpe
Date Posted: November 27, 2004 at 10:35 PM
My truck is a 2000 f150. Will I also need one of those pats bypass modules? How does that connect to the rattler? I see nothing about it in the install manual.
Is it worth the extra money to get the pats bypass or is the pats system worthless?
|